"Keep Calm And Mod On" Vinyl Decal. Featuring one Tacoma!
How to apply a vinyl decal:
Step 1: Clean The Surface - Wipe surface clean using a damp cloth with rubbing alcohol (no windex). Wait until the surface is completely dry.
Step 2: Prepare And Position your Decal - Use your hand or a squeegee and rub the top layer of the decal on a hard surface. Position your decal on the intended surface & secure the sheet with tape along the top. The tape now acts as a hinge.
Step 3: Remove Backing Paper - Flip the sheet on its hinge & very slowly peel the backing paper from the decal. If the decal stays stuck to the backing paper, rub the decal onto the transfer tape & slowly try again. Try changing angles as well.
Step 4: Apply the Decal - Using your hand or a squeegee, firmly rub over the transfer tape, working from the center out.
Step 5: Remove the Transfer Tape - At a 45 degree angle very slowly peel back the edge of the transfer tape. Press over the decal with your hand or squeegee ensuring the decal is well adhered. ALL PAU!
Subscribe to receive 10% off stickers & patches!