Nasa Aloha DecalRegular price $7.00 Save $-7.00
Nasa Aloha Decal. Limited Supply! Only made in small batches.
Small: 4" length, Indoor/outdoor waterproof premium vinyl
Large: 6" length, Indoor/outdoor waterproof premium vinyl
How to apply a vinyl decal:
Step 1: Clean The Surface - Wipe surface clean using a damp cloth with rubbing alcohol (no windex). Wait until the surface is completely dry.
Step 2: Prepare And Position your Decal - Use your hand or a squeegee and rub the top layer of the decal on a hard surface. Position your decal on the intended surface & secure the sheet with tape along the top. The tape now acts as a hinge.
Step 3: Remove Backing Paper - Flip the sheet on its hinge & very slowly peel the backing paper from the decal. If the decal stays stuck to the backing paper, rub the decal onto the transfer tape & slowly try again. Try changing angles as well.
Step 4: Apply the Decal - Using your hand or a squeegee, firmly rub over the transfer tape, working from the center out.
Step 5: Remove the Transfer Tape - At a 45 degree angle very slowly peel back the edge of the transfer tape. Press over the decal with your hand or squeegee ensuring the decal is well adhered. ALL PAU!